What You Should Know About Your Air Conditioner’s Fins

Recently get an air conditioner installed? If so, you may not be aware about the sort of care that needs to go into maintaining it. In order for the AC to work efficiently, the fins of the outdoor condenser need to remain straight. This allows for airflow so the unit can work properly. Here is what you should do to straighten those bent fins.

Getting Started

It is important that none of the fins on the condenser that are bent are also damaged, which is why you need the right tools for the job. You should start by inspecting the unit, which will give you an idea about what kind of tools you need to use to straighten the fins. While there are tools you can purchase to help straighten those fins on the condenser, you could use a flathead screwdriver or a butter knife as well.

Your local home improvement store should sell fin combs to help you get the job done. A high-end fin comb will have tools that will straighten fins with varying widths, while cheaper ones are more of a one-size-fits-all tool.

Accessing The Bent Fins

You'll need to gain access to the units back cover to get to the fins. Some air conditioner condensers use gravity clips, which allow you to just pull the cover off and push it back on without any special tools. Other air conditioner will need a screwdriver to undo the screws that are holding the cover in place.

Straightening The Bent Fins

Find the fin comb that matches the size needed for your air conditioner. Slide the comb over the fin, and it will straighten each fin properly. The great thing about using a professional tool is that it is hard to mess it up. You literally take the fin straightener and run it over the metal grates multiple times as if you were using a comb to brush your hair and get all the knots out. It will take several passes, but eventually the fins will become straight once again.

Using a screwdriver or butter knife requires you to put pressure on the fins, and you could apply too much pressure and bend the fin the opposite direction. It can also be quite time consuming, but is great if you only have a few fins that need straightening and do not want to buy additional tools.

With these tips in mind, you'll be ready to maintain your new air conditioner when the time comes. Speak to a professional from companies like Pristine Air Conditioning Corp for more assistance.